Pleasant Acrylic LLC

How to Bend Acrylic and Make Amazing Shapes

How to Bend Acrylic

You get several thoughts when you think about how to bend acrylic sheets. Let me tell you the names of the machines that can bend them. They are the strip heaters, heating guns, soldering irons, and propane torches. There are artists who like to use ovens as well as hair dryers for bending acrylics.

Anyways, there is a uniting factor in each of these ways. The factor is the use of heat. In this technique, the acrylic is heated till it reaches a level where it melts. Then you can start bending acrylic sheets in any shapes that you love.

Here we will introduce a new way to bend acrylic sheet sets that uses the same factor of heat. And I am sure anyone can use this way. In this post, we will talk about various ways to create shapes after plexiglass bending.

Preliminary Steps

Simple Bend

Prior to starting to heat the sections do peel away the two security covers that are stuck in the sides. When you heat the sections the covers will melt alongside and will be permanently stuck on the sheet. Never forget this rule while using any acrylic bending machine. You can use the movable gas stoves to heat it for acrylic bending. Most houses have a gas stove. In tiny companies, they use these stoves.

Table of Content

How to Bend Acrylic to Create Phone Stands

For this result, you need to use a bigger piece of acrylic. See that the price is more than double the mobile phone. Plus the breadth must be one inch more than the phone. You may also use the same breadth. Here you need to create two bends. Since the section is large the time for bending is more.

The way to heat this acrylic section is slow. You need lots of time and peace of mind. Here you need two forty-five-degree bends. One bend must be made at the end within one or two inches of the section. And the next must be made at the exact length measurement of the phone.

In this way, you can place the phone on the smaller bend and the larger bend will hold the weight of the phone. The smaller bend is at the foot of the phone. Use the same way of holding the acrylic with the wooden sections as in the previous method. In about twenty minutes you get a finished phone stand. Also read the advantages of acrylic plastic.

Precautions While Bending

Create A Bow Shape

Use a wooden bow-shaped unit for this. The unit must be strong and at least five centimeters thick and forty to fifty centimeters long. It should be a three-dimensional unit. Here heat the acrylic just like in the first simple bend method in this post.

After that, the acrylic will bend automatically at the right time. Then take it near the wooden bow shape. Press the acrylic on the bow and make sure that the acrylic gets the shape of the bow. In this method, you will get a beautiful bow-shaped piece.

Create Thin Acrylic Bends

Cut thin sections of the sheet say about two centimeters. Mix concrete in a small amount to make a tile. After that heat the place on the acrylic you want to bend. Next, place the sheet into the three-fourth-done concrete.

Then bend the sheet. In this method, the acrylic will get stuck into the concrete. And you will also bend the sheet ninety degrees. Start bending from about four centimeters from the concrete. This way you create artistic shapes from thin sheets.

In this post, you found out the ways how to bend acrylic. You can use the different novel bending methods that we have discussed above.

Pleasant Acrylic is an acrylic manufacturing company that provides acrylic service and fabrication in Dubai, United Arab Emirates, specializing in POP exhibits. The group is run by a leadership team with the aim of capturing the large acrylic market in the UAE through service excellence, service, good Acrylic Design UAE, and excellent satisfaction. Also Read our blog post: Why does Acrylic Furniture have more Acceptance?, For more details contact us today.


also read our blog post:  7 Tips for Working With Acrylic



Exit mobile version